Ducati, 996,916,748, 1995-2003 / Complete set 4-pieces Street

Complete set 4-piece Street. Complete set, where 1 or more parts are provided in Street version with cut out for light, stand or exhaust.
8 (quick) fasteners are required to connect the Upper part to the Side parts.
Ducati, 996,916,748: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003

Full description
Choose design:
ID: D78-CS4|G
453,72 Eur without VAT
549 Eur incl. VAT
Print Recommend product Check shipping price
Ducati 996,916,748 1995-2003

Complete set 4-pieces Street contains:

Complete set 4-pieces Street includes :

  • 1x Upper part - small with cut out for headlight:
    a) original small airducts
    b) bigger airducts R
  • 1x Side part R
  • 1x Side part L with cut out for side stand
  • 1x Seat racing (for foam seat):
    a) with 4 vents (mostly  748,916, 996)
    b) with 2 vents (mostly 748,916,996)
    c) with no wents (mostly 998)

* Every seat has a different dimension see photo No. 6. Confirm your seat according to size of your rear frame.
In the event that you will not make a note of the selection, automatically assigns and type a) by the upper part and type a) for the seat.

Attractive price compared to parts bought separately.

>>>> why Motoforza?

  • TOP quality proven series MotoGP, WSBK, IDM, IRC, TT
  • Perfect fitting, flexibility, durability
  • Several layers of Kevlar-Carbon reinforcements for extra durability
  • Smooth surface compliant coating, pin-hole free.
  • Our parts are much lighter and much cheaper than ABS original Parts

Your question

You did not find in the description what you needed? Contact us.

GRP - Fiberglass

Basic and cheapest version is GFK fiberglass. Thanks to the precision of employees in handmade production and the emphasis on the quality of these products, they have perfect flexibility, durability and low weight. Composition - UV stable white gelcoat (not paint), fiberglass mat and fiberglass cloth impregnated with resin. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon layers as needed, or Coremat for the seats. Parts are flexible and have a smooth surface. Are made for painting.

Why GFK- fiberglass? For example those who want to put fairings on for the circuit at low cost. Or inexpensively replace a precious piece (broken) original.

This is a complete set Street version. Complete set, where 1 or more parts are provided in Street version with cut out for light, stand or exhaust

  • The upper part, side parts and oil sump are not compatible with the original parts, only themselves to each other.
  • Low weight, flexibility, durability, thanks to the combination of composite materials and precise manual production.
  • Several layers of Kevlar-Carbon reinforcements for extra durability.
  • Upper part can be used with the original screen.
  • Our Bottom racing parts and racing oil pan are capable according to the technical rules to accommodate 4 liters of oil.
  • Seat racing (for foam seat) with cut out for tail light

Advantages 4-piece set :

  • Better storability (place in the van is never enough)
  • The possibility to exchange only side parts after the fall
  • Easier access to the engine
  • The lower number (quick) screws to mount
  • 8 (quick) fasteners are required to connect the Upper part with Side parts.
  • Our fairings use stock mounting points and most parts have drilling points clearly indicated on the fairing.
  • Thanks to the proposed design and the division of the fairing on fewer parts than the orig. ABS plastic considerably easier assembly.


Installation instructions, hints, tips for installation found here >>>

© 2020 Motoforza spol, s r.o. Foreveryone