Honda, NSF 250R MR03, 2012-2019 / Foam seat pad EVO 3 for Honda NSF 250r Moto3 seat version 1

• Pre-cut shape with rounded edges. Adhesive.
• Thickness 12mm

• NEW better type of foam EVO3
   
• This is a high density foam used in conjunction with our Seat closed or GFK polster (seat base).
   
• Soft for superb feeling of bike
   
• Our new foams seats, used for racing seats are made from  high quality neoprene material. 
• Better control of the bike, but also brings the comfort. 
• Due to this "sticky" material you can corner harder - you'd slide off a stock seat.

Installation or Technical Notes :

• Excellent flexibility to absorb vibrations.
• High density (closed cellular structure). NO Spalling of the material
• Preinstalled glue
• Resistant to oils and tear,low water absorption.

• The Installaton guide is to be found in the Technic section - Installation Guide

MOTOFORZA Recommendations :

• To work the foam sheets and obtain excellent finish you just need a hacksaw with a thin stiff blade, a cutter, some sandpaper of different grains.