Foam seat pad Honda RS 125 2004- / NSR 250f Moto3


-This is a high density foam used in conjunction with our Seat closed or GFK polster (seat base).
- soft for superb feeling, adhesive
Moto 3, Honda NSF 250R MR03: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Honda, RS 125: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Honda, RS 125 A-KIT: 2004, 2005, 2006, 2007

Full description
ID: M3H-G1
32,23 Eur without VAT
22,56 Eur without VAT
27,30 Eur incl. VAT
Print Recommend product Check shipping price
Moto 3 Honda NSF 250R MR03 2012-2019
Honda RS 125 2004-2010
Honda RS 125 A-KIT 2004-2007
  • For models :
    Honda NSF 250R Moto3
    Honda RSW 125 2004-
  • UNI  pre-cut shape with rounded edges
  • NEW better type of foam
  • This is a high density foam used in conjunction with our Seat closed or GFK polster (seat base).
  • Our new foams seats, used for racing seats are made from a combination of two high quality materials, whose properties were honed according to specific requirements for more than a year. 
    These materials combine toughness for better control of the bike, but also brings the comfort. 
    Coating reduces slipperiness and cell structure eliminates water absorption and possible spalling of the material. 
    Foam is due to the combination of twice networking almost indestructible. 
  • Due to this "sticky" material you can corner harder - you'd slide off a stock seat.

Installation or Technical Notes :

  • Excellent flexibility to absorb vibrations.
  • High density (closed cellular structure). NO Spalling of the material
  • Preinstalled glue
  • Resistant to oils and tear,low water absorption.
  • The Installaton guide is to be found in the Technic section - Installation Guide

MOTOFORZA Recommendations :


  • To work the foam sheets and obtain excellent finish you just need a hacksaw with a thin stiff blade, a cutter, some sandpaper of different grains.  

Your question

You did not find in the description what you needed? Contact us.

© 2020 Motoforza spol, s r.o. Foreveryone