Back

Yamaha, YZF R-6, 2008-2016 / Front Bracket with airduct - SET - Conversion Fairing 2017

Front Bracket with airduct - SET - Conversion Fairing 2017. Lightweight duralumin racing front bracket for instruments and upper part. Smart accessories included, will not find elsewhere. Much cheaper replacement of the original front bracket with correction possibility after the fall.
Yamaha, YZF R-6: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Yamaha, YZF R-6: 2006, 2007

Full description
Choose design:
ID: Y6-DNCS08C|ALGB
136,36 Eur without VAT
165 Eur incl. VAT
pc
ID: Y6-DNCS08C|ALC
177,27 Eur without VAT
214,50 Eur incl. VAT
pc
Print Recommend product Check shipping price
Yamaha YZF R-6 2008-2016
Yamaha YZF R-6 2006-2007

Front Bracket with airduct - SET - Conversion Fairing 2017 contains:

  • Front Bracket with airduct - SET - Conversion for Fairing Motoforza Yamaha YZF R6 2017-
     
  • Serves as a tachometer holder as well as an upper part holder (especially for racing use)
     
  • Its cca about 30-50% cheaper than original front bracket.
     
  • Its made from duralumin and the surface is coated by black paint.
     
  • Design is light and strong, so as to meet the needs of racing.

Set includes :

  • Front bracket
  • Fasteners (allen head) with washers.
  • Rubber bushings for Tachometer.

Your question

You did not find in the description what you needed? Contact us.

ALU & GRP

Duralaluminium front bracket Forzaholders + Racing Airduct GRP-coloured black. Dural material combines low weight and strength. This material is used for racing tachometer brackets and rear sub frames. They are lighter than original parts and have a lower purchase price. Finished with black lacquer, which does not change over time.

Why buy DURAL Motoforza Parts? Unlike the fragile original, high toughness. There is less risk of total destruction if the motorcycle falls. The original disintegrates without repair. Duralumin part can usually "straighten" and finish after repair racing weekend.

Why GRP - colored fiberglass? - Nice polished parts, for those who want to save for the paintjob if they fit accessory in black. After hitting with for example Gravel, the part remains black of the damaged place.





 


ALU & Carbon

Dural material combines low weight and strength. This material is used for racing tachometer brackets and rear sub frames. They are lighter than original parts and have a lower purchase price. Finished with black lacquer, which does not change over time.

Why buy DURAL Motoforza Parts? Unlike the fragile original, high toughness. There is less risk of total destruction if the motorcycle falls. The original disintegrates without repair. Duralumin part can usually "straighten" and finish after repair racing weekend.

CARBON parts :  consist of a transparent gelcoat and carbon fabric and resin used here is different than GRP parts. The components are lightweight and stronger than GRP. Weight reduction compared to GRP is about 30-50%. The parts are polished to a high gloss, for the carbon fiber to stand out.





 


  • The front bracket is for use with original instruments (tachometer).
     
  • Unlike fragile original high toughness.
     
  • When the fall of the motorcycle have a lower risk of total destruction. Mostly it can be straighten and finish the weekend after repair.
  • Easy installation by exchange for original front bracket.
     
  • Due to quick fasteners very simple and faster installation and uninstallation of upper part.
     
  • Preinstalled counter parts of Quick fasteners.
     
  • TIP: If necessary, riveted bayonet fastener can be drill out and use a conventional screws, e.g. Using threaded rivet nut.

Installation instructions, hints, tips for installation found here >>>

© 2020 Motoforza spol, s r.o. Foreveryone