Honda, CBR 600 RR, 2009-2012 / Ignition cover - TECH RACE 09-12-13

Functionality and attractive appearance. Protecting the engine from impurities.
Honda, CBR 600 RR: 2009, 2010, 2011, 2012
Honda, CBR 600 RR: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

Full description
Choose design:
ID: H6-KZRT09-|C
57,85 Eur without VAT
70 Eur incl. VAT
Print Recommend product Check shipping price
Honda CBR 600 RR 2009-2012
Honda CBR 600 RR 2013-2020

Engine covers Motoforza - Left Side

  • Protecting of the motorcycle, which saves you a lot of money.
  • Very useful and effective protection of fragile and expensive engine parts.
  • Applicable not only on circuits, but also in normal roads.
  • Despite the high protective function, low weight.
  • Prevents cracking of aluminum or the magnesium original caps and will not allow the penetration of dirt and stones to engine, crank or oil pump.
  • 4-6 layers of Carbon / Kevlar molded under pressure. This is achieved great strength of the product.

Your question

You did not find in the description what you needed? Contact us.


 These products consist of a transparent gelcoat and carbon fabric and resin used here is different than GRP parts. The components are lightweight and stronger than GRP. Weight reduction compared to GRP is about 30-50%. The parts are polished to a high gloss, for the carbon fiber to stand out. Note: (Engine covers, frame covers, swing arm covers - first layer Carbon (black fabric) + additional layers of Kevlar-Carbon). 

Why Carbon design? - For fans of Carbon. Low weight and hardness. In this embodiment, we place extreme emphasis on the surface and visible layer so as to stand out preferably carbon cloth. Suitable for showbikes. Highly polished. Parts also don’t need any paint. At the frame, swing-arm, engine and other small covers using multiple layers of carbon and Kevlar-Carbon achieved extreme hardness of the product.

Constancy of carbon is guaranteed. UV protected for non-fading and hi-gloss look - by all our Carbon, K-K and Titanium silver products.

Used material: 4-6-layers of carbon/kevlar fiber pressed-in under pressure.

The cover prevents the penetration of dirt and stones in the engine/chain.

Sehr einfache Installation anstelle von Originalabdeckung.


Installation instructions, hints, tips for installation found here >>>

© 2020 Motoforza spol, s r.o. Foreveryone