Installation of projectors ("headlights")

• Change your road version of the upper part and take the advantage of our installation projectors (lights) to our fairings.

• Original and rapid appearance of your motorcycle

• About 50% less cost of acquisition over the entire reconstruction than of the original replacement of broken headlight.

• Choose from several types of projectors (lights), a variable location in the fairing of your choice.
  
  
• Choice of multiple sizes (from 38m, 50mm, 84mm to 105mm) and types of projectors (lenses) (spotlight, long-distance, combi), variable placement in the fairing at your request.

Placement options available in lamination of holders :

a) CENTER (available combinations 1x38,50,84,105 *2x 38mm, *2x 50mm)

b) LEFT (from the rider's point of view)

c) RIGHT (from the rider's point of view )

d) LEFT, RIGHT 

(available combinations : 1x50+1x38, 1x50+1x84)

e) CASCADE 2x50  

(available combinations of holders : 1x50+1x38, 1x50+1x84)

f) TRIANGLE 3x50, 1x50 + 2x38  

*With these combinations, it is always necessary to test whether the installation will be possible in the selected fairing, I will try and contact you.

How to order the installation?

1. Order selected types of projectors / headlights , holders and installation in our Eshop.

2. Order by us or deliver to us a part in which you want to install the projector / headlight. 
We will choose the most suitable place, type and number of projectors for your fairing / part, we will send you a proposal for the location of the projectors/headlights.

3. Send a drawing /sketch of the approximate location of the projectors by (email, in person, by mail)

Do you need advice on selection?

• Of course, you can discuss your selection with us.

• We'll try to pick the best location, type and number of projector for your fairing / part.

• Below are a couple of samples of our work.