- XENON light, including aperture for switching between low beam and high beam, HID bulb 12V 35W
- H1 55W (Diamer of projector cca 50mm, Height of glass 20mm, diameter of frame 67mm, lenght cca 123mm, width incl. frame 93mm,
- 2x 5mm pre-drilled holes.
Installation or Technical notes :
- Projector has EU homologation
- Fits to projector holder ID: (EIBR50)
Installation of Projectors (lights) :
- Change your road version of the upper part and take the advantage of our installation projectors (lights) to our fairings.
- Original and rapid appearance of your motorcycle
- About 50% less cost of acquisition over the entire reconstruction than of the original replacement of broken headlight.
- Choose from several types of projectors (lights), a variable location in the fairing of your choice.
How to order the installation?
1. Order selected types of projectors and holders in our Eshop. Make a note request for installation.
2. Order or deliver to us a part in which you want to install.
3. Send us a sketch of the approximate location of the projector.
Do you need advice on choosing?
- Of course you can consult your selection with us.
- We'll try to pick the best location, type and number of projector for your fairing / part.