MV Agusta Brutale 600, 800 2012-2016Rear fender

MV Agusta Brutale 600, 800 2012 2013 2014 2015 2016

Select a design

GRP - Fiberglass
GRP - Coloured black
Carbon
Kevlar-Carbon
Titanium Silver

Code: MVB68-ZB|G

Price without VAT: 45,45 

Code: MVB68-ZB|GB

Price without VAT: 90,91 

Code: MVB68-ZB|C

Price without VAT: 143,96 

Code: MVB68-ZB|KK

Price without VAT: 143,96 

Code: MVB68-ZB|T

Price without VAT: 143,96 

  • This prevents the penetration of water and dirt to a central suspension unit and wiring.
    & nbsp;
  • We offer in several versions.

Installation

Fenders use the original mounting points. (Exceptions may fenders on certain models category "naked bikes").

When installing, ensure the correct drilling mounting holes and then tighten the screws with a flair for the right fender position.

Installation instructions, hints, tips for installation found here >>>

Technical specifications

  • Fenders with only few exceptions are for the original tire size.
  • Our fenders are made from fiberglass (GFK), from several layers of mat and cloth saturated with high-quality resin => excellent rigidity and flexibility.
  • In-prone places reinforced with Kevlar-Carbon.
  • UV stable white gelcoat can be sanded under water, sprayed filler and sprayed with paint or sanded under water and sprayed in an emergency.

Materials / design

GRP - Fiberglass

Basic and cheapest version is GFK fiberglass. Thanks to the precision of employees in handmade production and the emphasis on the quality of these products, they have perfect flexibility, durability and low weight. Composition - UV stable white gelcoat (not paint), fiberglass mat and fiberglass cloth impregnated with resin. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon layers as needed, or Coremat for the seats. Parts are flexible and have a smooth surface. Are made for painting.
Why GFK- fiberglass? For example those who want to put fairings on for the circuit at low cost. Or inexpensively replace a precious piece (broken) original.

GRP - Coloured black

Composition - UV stable gelcoat - colored (black RAL 9005), fiberglass mat and fiberglass cloth impregnated with resin. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon or Coremat for the seats. Parts are flexible and have a smooth and polished surface. There is no need to paint! 
Why GRP - colored fiberglass? - Nice polished parts, for those who want to save for the paintjob if they fit accessory in black. After hitting with for example Gravel, the part remains black of the damaged place.

Carbon

These products consist of a transparent gelcoat and carbon fabric and resin used here is different than GRP parts. The components are lightweight and stronger than GRP. Weight reduction compared to GRP is about 30-50%. The parts are polished to a high gloss, for the carbon fiber to stand out. Note: (Engine covers, frame covers, swing arm covers - first layer Carbon (black fabric) + additional layers of Kevlar-Carbon). 
Why Carbon design? - For fans of Carbon. Low weight and hardness. In this embodiment, we place extreme emphasis on the surface and visible layer so as to stand out preferably carbon cloth. Suitable for show bikes. Highly polished. Parts also don’t need any paint. On the frame, swing-arm, engine and some small covers by using multiple layers of carbon and kevlar-carbon we achieved extreme hardness of the product.

Kevlar-Carbon

Para-aramid fiber whose properties are high abrasion resistance. These products consist of a transparent gelcoat, Kevlar fabric, which is carbon-laced (Kevlar-Carbon) against yellow-black color products. There is also used different kind of resin than fiberglass. In this embodiment, we place extreme emphasis on the surface and visible layer so as to stand out preferably carbon cloth. Suitable for show bike. Highly polished. Parts don’t need any paint. This material is used on reinforcements in exposed places in our products.
Why Kevlar-Carbon finish? - For those who want to be different! The components are lightweight, stronger and least susceptible to abrasion of any kind.

Titanium Silver

Parts of this material are a special design accessories. Optical tuning. Manufactured to order. Parts are similar in appearance to carbon products, however, have a silver-titanium color. They are polished to a high gloss, so that the visible structure of the fabric.
Why Titanium Silver finish?- For those who want to be different!

Your questions

Didn't find what you need to know in the part description? Contact us.

In order to better personalize the website for you, we store cookies. By using the website, you agree to this. I need more information