UNI Seat CAFE RACER v.3 with Tail Light - SET

Select a design

GRP - Fiberglass
Performance

Code: OU-CR3CS|G

Price without VAT: 126,45 

Code: OU-CR3CS|P

Price without VAT: 278,19 

UNI Seat CAFE RACER v.3 with Tail Light - SET contains:

  • Seat for oldtimer - vintage / cafe racer for foam seat or coating leather (leatherette).
  • With pre-installed tail light and holder

Dimensisons: image #5

>>>> why Motoforza?

  • Nice processing also from inside.
  • Several layers of mats and fabrics embody quality resin => Excellent rigidity and flexibility.
  • Finish is smooth, comliant coating, pin-hole free.
  • Most of our parts are replicas of rare original parts in high quality processing.

Materials / design

Video

GRP - Fiberglass

Basic and cheapest version is GFK fiberglass. Thanks to the precision of employees in handmade production and the emphasis on the quality of these products, they have perfect flexibility, durability and low weight. Composition - UV stable white gelcoat (not paint), fiberglass mat and fiberglass cloth impregnated with resin. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon layers as needed, or Coremat for the seats. Parts are flexible and have mostly a smooth surface. Are made for paint job.
More Images here >>>
Why GFK- fiberglass? For example those who want to put fairings on for the circuit at low cost. Or inexpensively replace a precious piece (broken) original.

Video

Performance

With these products, we focus on the lowest weight, while maintaining maximum flexibility and abrasion resistance. Composition - Carbon-Kevlar fabric into the white gelcoat. This design was developed based on testing and requirements of the elite teams in the prestigious series of races. In terms of prices of comparable economical alternative to carbon parts. They are lighter than GRP parts. Made for paint job. The material used Kevlar-Carbon, Carbon, white gelcoat and resin. Coremat for the seats. 
Why choose Performance? - As the name, parts for high performance best ratio quality, price, low weight. More flexible, more resilient for longer life than GRP parts, cheaper than the market more expensive Carbon parts. Weight and functionality comparable to carbon parts..

Installation

Due to the fact that in most uses seat on the builds and modification, it is necessary to assembly fairing on bike and then make seat brackets.

Installation instructions, hints, tips for installation found here >>>

Technical specifications

Type of part - Seat      Position on the bike - rear

Finish is smooth, nice inside too, pin-hole free.
Brackets and screws are not included.

  • Our Oldtimer parts are made from fiberglass (GFK), from several layers of mat and cloth saturated with high-quality resin => excellent rigidity and flexibility.
  • Additionally version Performance - Kevlar-Carbon in white gel-coat. This version combines the extra durability, complete flexibility and low weight.
  • UV stable white gelcoat by both versions can be sanded under water, sprayed filler and sprayed with paint or sanded under water and sprayed in an emergency.
  • Karbon - Some parts custom manufactured in the Carbon high gloss to highlight the structure of the carbon fiber fabric, without the need for painting.

Your questions

Didn't find what you need to know in the part description? Contact us.

In order to better personalize the website for you, we store cookies. By using the website, you agree to this. I need more information