UNI Seat Cafe racer version 5

Select a design

GRP - Fiberglass
Carbon

Code: OU-CR5|G

Price without VAT: 95,04 

Code: OU-CR5|C

Price without VAT: 284,30 

  • Seat for oldtimer - vintage / cafe racer for foam seat or coating leather (leatherette).

Dimensisons: image #2

>>>> why Motoforza?

  • Nice processing also from inside.
  • Several layers of mats and fabrics embody quality resin => Excellent rigidity and flexibility.
  • Finish is smooth, comliant coating, pin-hole free.
  • Most of our parts are replicas of rare original parts in high quality processing.

Materials / design

GRP - Fiberglass

Basic and cheapest version is GFK fiberglass. Thanks to the precision of employees in handmade production and the emphasis on the quality of these products, they have perfect flexibility, durability and low weight. Composition - UV stable white gelcoat (not paint), fiberglass mat and fiberglass cloth impregnated with resin. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon layers as needed, or Coremat for the seats. Parts are flexible and have a smooth surface. Are made for painting.
Why GFK- fiberglass? For example those who want to put fairings on for the circuit at low cost. Or inexpensively replace a precious piece (broken) original.

Carbon

These products consist of a transparent gelcoat and carbon fabric and resin used here is different than GRP parts. The components are lightweight and stronger than GRP. Weight reduction compared to GRP is about 30-50%. The parts are polished to a high gloss, for the carbon fiber to stand out. Note: (Engine covers, frame covers, swing arm covers - first layer Carbon (black fabric) + additional layers of Kevlar-Carbon). 
Why Carbon design? - For fans of Carbon. Low weight and hardness. In this embodiment, we place extreme emphasis on the surface and visible layer so as to stand out preferably carbon cloth. Suitable for show bikes. Highly polished. Parts also don’t need any paint. On the frame, swing-arm, engine and some small covers by using multiple layers of carbon and kevlar-carbon we achieved extreme hardness of the product.

Installation

Due to the fact that in most uses seat on the builds and modification, it is necessary to assembly fairing on bike and then make seat brackets.

Installation instructions, hints, tips for installation found here >>>

Technical specifications

Type of part - Seat      Position on the bike - rear

Finish is smooth, nice inside too, pin-hole free.
Brackets and screws are not included.

  • Our Oldtimer parts are made from fiberglass (GFK), from several layers of mat and cloth saturated with high-quality resin => excellent rigidity and flexibility.
  • Additionally version Performance - Kevlar-Carbon in white gel-coat. This version combines the extra durability, complete flexibility and low weight.
  • UV stable white gelcoat by both versions can be sanded under water, sprayed filler and sprayed with paint or sanded under water and sprayed in an emergency.
  • Karbon - Some parts custom manufactured in the Carbon high gloss to highlight the structure of the carbon fiber fabric, without the need for painting.

Your questions

Didn't find what you need to know in the part description? Contact us.

In order to better personalize the website for you, we store cookies. By using the website, you agree to this. I need more information