UNIVERSAL Foam seat Neoprene EVO 3 - 400x250x12 Oldtimer Classic

• 400x250mm
   
• Thickness 12mm
• Fits on Oldtimer and cafe racer seats.
• UNIversal sheet foam pad

• NEW better type of foam EVO3
   
• This is a high density foam used in conjunction with our Seat closed or GFK polster (seat base) or an anti-vibration support for racing instruments.
• Due to this "sticky" material you can corner harder - you'd slide off a stock seat.

• Soft for superb feeling of bike
   
• Our new foams seats, used for racing seats are made from  high quality neoprene material. 
• Better control of the bike, but also brings the comfort. 
• Due to this "sticky" material you can corner harder - you'd slide off a stock seat.

MOTOFORZA Recommendations :
 

• Don't be afraid to be creative either! You can cut the seat foam to any shape with some patience!
• To work the foam sheets and obtain excellent finish you just need a hacksaw with a thin stiff blade, a cutter, some sandpaper of different grains.
• You can also double up the foam to provide a bit more cushioning.
• You can use the roll of seat foam as a seat support as well.
• A racing tail section may crack under the weight of a rider without a support underneath.
• You can roll some of the seat foam and stuff it under the tail section as a support before installation.