Bellypan -SET - Triumph 1050 Speed Triple 2005-2010

Select a design

GRP - Fiberglass
GRP - Coloured black
Carbon - Plain - Glossy
%Action -10%
Carbon - Twill - Glossy

Code: T1T-2SCS|G

Price without VAT: 111,94 

Code: T1T-2SCS|GB

Price without VAT: 179,11 

Code: T1T-2SCS|CFPG

Original price: 358,21 

Price without VAT: 321,49 

Code: T1T-2SCS|CFTG

Price without VAT: 358,21 

Bellypan -SET - Triumph 1050 Speed Triple 2005-2010 contains:

Design accessory that gives the motorcycle a dynamic appearance.

  • Supplied with installed 4x rubber bushings with inserts to absorb the vibrations while riding.
     
  • Deliver with mounting kit brackets.

  • Carbon design we supply with cut out and mesh.

  • We offer the opportunity to buy UNI mounting kit (U-D2S), which allows practically any bellypan to be used on any type of motorcycle.
     
  • HINT: You didn't find bellypan at your model? We offer several UNI bellypans that fit to almost anything.

Installation

  • With the installation mounting set to the bellypan, follow the supplied instructions (or check gallery image nr10-11 for positions of brackets).
  • If it is not to the exact model is missing in offer mounting kit installation do not despair. Just adjust Motoforza UNI mounting kit, which can be purchased for bellypans. Assembly mounts just bend and cutt as needed to lower situated mounting points on to the engine. You can customize everything to settle a bellypan according to your wishes. (The kit set: 2x lon strip, 3x short strip , strips are with rivet threaded nut and screw-see photo #).
  • Of course, the bellypan is supplied rubber bushings with inserts for absorbing vibration abatement while driving. (included in the price of the bellypan).

As the entire installation lap and bushings here >>>

Technical specifications

  • Our bellypans are made from fiberglass (GFK), from several layers of mat and cloth saturated with high-quality resin => excellent rigidity and flexibility.
  • Finish is smooth, pre-drilled mounting points
  • Kevlar-carbon reinforced mounting areas to provide exceptional strength.

Supply in various design e.g.:

  1. GFK-fiberglass
  2. GFK-coloured fiberglass black
  3. Karbon
  4. Kevlar-Karbon

Materials / design

Video

GRP - Fiberglass

Basic and cheapest version is GFK fiberglass. Thanks to the precision of employees in handmade production and the emphasis on the quality of these products, they have perfect flexibility, durability and low weight. Composition - UV stable white gelcoat (not paint), fiberglass mat and fiberglass cloth impregnated with resin. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon layers as needed, or Coremat for the seats. Parts are flexible and have mostly a smooth surface. Are made for paint job.
More Images here >>>
Why GFK- fiberglass? For example those who want to put fairings on for the circuit at low cost. Or inexpensively replace a precious piece (broken) original.

Video

GRP - Coloured black

Composition - UV stable gelcoat - colored (black RAL 9005), fiberglass mat and fiberglass cloth impregnated with resin. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon or Coremat for the seats. Parts are flexible and have a smooth and polished surface. There is no need to paint!  
More images here >>>
Why GRP - colored fiberglass? - Nice polished parts, for those who want to save for the paint job if they fit accessory in black. After hitting with for example Gravel, the part remains black of the damaged place.

Video

Carbon - Plain - Glossy

Plain carbon fabric + glossy look layer.
Manufactured in an autoclave, thanks to which the parts have extra light weight and hardness.
The parts are light and stronger than GFK parts and considerably lighter than ABS (about 30-50%).
It is not necessary to paint. Ready for installation incl. pre-drilled holes.


Why Carbon design? - Combination of aesthetic design and functionality. Low weight and hardness. Suitable not only for "show bikes".

Carbon - Twill - Glossy

Twill carbon fabric + glossy look layer.
Manufactured in an autoclave, thanks to which the parts have extra light weight and hardness.
The parts are light and stronger than GFK parts and considerably lighter than ABS (about 30-50%).
It is not necessary to paint. Ready for installation incl. pre-drilled holes.


Why Carbon design? - Combination of aesthetic design and functionality. Low weight and hardness. Suitable not only for "show bikes".

Your questions

Didn't find what you need to know in the part description? Contact us.

In order to better personalize the website for you, we store cookies. By using the website, you agree to this. I need more information