Back

Honda, CBR 1000 RR, 2008-2011 / Foam seat pad Honda CBR 1000RR 08-11 HRC

Action
%


Honda, CBR 1000 RR: 2008, 2009, 2010, 2011
Kawasaki, ER-6: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Kawasaki, KLE 650 Versys: 2007, 2008
Kawasaki, GPX 650r: 2006, 2007

ID: H1-G1H08
29,75 Eur without VAT
28,26 Eur without VAT
34,20 Eur incl. VAT
pc
Print Recommend product
Honda CBR 1000 RR 2008-2011
Kawasaki ER-6 2006-2012
Kawasaki KLE 650 Versys 2007-2008
More models
  • Honda CBR 1000RR 08-11 HRC version
  • UNI  pre-cut shape with rounded edges
  • NEW better type of foam
  • This is a high density foam used in conjunction with our Seat closed or GFK polster (seat base).
     
  • Our new foams seats, used for racing seats are made from a combination of two high quality materials, whose properties were honed according to specific requirements for more than a year. 
    These materials combine toughness for better control of the bike, but also brings the comfort. 
    Coating reduces slipperiness and cell structure eliminates water absorption and possible spalling of the material. 
    Foam is due to the combination of twice networking almost indestructible. 
  • Due to this "sticky" material you can corner harder - you'd slide off a stock seat.

Installation or Technical Notes :

  • Excellent flexibility to absorb vibrations.
  • High density (closed cellular structure). NO Spalling of the material
  • Preinstalled glue
  • Resistant to oils and tear,low water absorption.
  • The Installaton guide is to be found in the Technic section - Installation Guide

MOTOFORZA Recommendations :

 

  • To work the foam sheets and obtain excellent finish you just need a hacksaw with a thin stiff blade, a cutter, some sandpaper of different grains.  
  •  

Your question

You did not find in the description what you needed? Contact us.

© 2019 Motoforza spol, s r.o. Foreveryone