New

Front fender - version 2 RSV 1000R Factory (Tuono 1000R Factory) - SALE

Carbon
%Sale -15%

Code: A1-PB2s04|C

Original price: 287,50 

Price without VAT: 244,63 

Přední blatník - verze 2 RSV 1000R Factory (Tuono 1000R Factory) - VÝPRODEJPřední blatník - verze 2 RSV 1000R Factory (Tuono 1000R Factory) - VÝPRODEJ
Přední blatník - verze 2 RSV 1000R Factory (Tuono 1000R Factory) - VÝPRODEJ
Přední blatník - verze 2 RSV 1000R Factory (Tuono 1000R Factory) - VÝPRODEJ
Přední blatník - verze 2 RSV 1000R Factory (Tuono 1000R Factory) - VÝPRODEJ

Aprilia RSV 1000R Factory 04-09 (front suspension Ohlins)

Aprilia RSV Tuono 1000R Factory 2004-2010 (front suspension Ohlins)

  • Our fenders are available in several variants.
     
  • Default shipped from fiberglass (GRP) from several layers of mat and cloth saturated with high-quality resin =>   excellent rigidity and flexibility.
     
  • In-prone areas reinforced with Kevlar-carbon.

Materials / design

Video

Carbon

These products consist of a transparent gelcoat and carbon fabric and resin used here is different than GRP parts. The components are lightweight and stronger than GRP. Weight reduction compared to GRP is about 30-50%. The parts are polished to a high gloss, for the carbon fiber to stand out. Note: (Engine covers, frame covers, swing arm covers - first layer Carbon (black fabric) + additional layers of Kevlar-Carbon). 
Why Carbon design? - For fans of Carbon. Low weight and hardness. In this embodiment, we place extreme emphasis on the surface and visible layer so as to stand out preferably carbon cloth. Suitable for show bikes. Highly polished. Parts also don’t need any paint. On the frame, swing-arm, engine and some small covers by using multiple layers of carbon and kevlar-carbon we achieved extreme hardness of the product.

Installation

Fenders use the original mounting points..

When installing, ensure the correct drilling mounting holes and then tighten the screws with a flair for the right fender position.

Installation instructions, hints, tips for installation found here >>>

Technical specifications

  • Fenders with only few exceptions are for the original tire size.
  • Fenders use original mounting points.
  • Our fenders are made from fiberglass (GFK), from several layers of mat and cloth saturated with high-quality resin => excellent rigidity and flexibility.
  • In-prone places reinforced with Kevlar-Carbon.
  • UV stable white gelcoat can be sanded under water, sprayed filler and sprayed with paint or sanded under water and sprayed in an emergency.

Your questions

Didn't find what you need to know in the part description? Contact us.

In order to better personalize the website for you, we store cookies. By using the website, you agree to this. I need more information