New

Rear Fender (Hugger) - Ducati 600SS 750SS 800SS 900SS - SALE -20%

Carbon %Sale -20%

Code: D9-ZB92-97s|C

Original price: 243,80 

Price without VAT: 195,04 

Ducati 600SS 750SS 800SS 900SS 1991-2003 - Zadní blatník  - VÝPRODEJ -20%Ducati 600SS 750SS 800SS 900SS 1991-2003 - Zadní blatník  - VÝPRODEJ -20%
Ducati 600SS 750SS 800SS 900SS 1991-2003 - Zadní blatník  - VÝPRODEJ -20%
Ducati 600SS 750SS 800SS 900SS 1991-2003 - Zadní blatník  - VÝPRODEJ -20%
Ducati 600SS 750SS 800SS 900SS 1991-2003 - Zadní blatník  - VÝPRODEJ -20%
Ducati 600SS 750SS 800SS 900SS 1991-2003 - Zadní blatník  - VÝPRODEJ -20%
  • Part is in categories above:

  • Fits to models: 
    All Ducati SS models 1992-1998
    All early Ducati IE models up to 2002
    + 800cc late Ducati IE models after 2002

     

  • This prevents the penetration of water and dirt to a central suspension unit and wiring.
     
  • We offer in several versions.

Materials / design

Carbon

These products consist of a transparent gelcoat and carbon fabric and resin used here is different than GRP parts. The components are lightweight and stronger than GRP. Weight reduction compared to GRP is about 30-50%. The parts are polished to a high gloss, for the carbon fiber to stand out. Note: (Engine covers, frame covers, swing arm covers - first layer Carbon (black fabric) + additional layers of Kevlar-Carbon). 
Why Carbon design? - For fans of Carbon. Low weight and hardness. In this embodiment, we place extreme emphasis on the surface and visible layer so as to stand out preferably carbon cloth. Suitable for show bikes. Highly polished. Parts also don’t need any paint. On the frame, swing-arm, engine and some small covers by using multiple layers of carbon and kevlar-carbon we achieved extreme hardness of the product.

Installation

Fenders use the original mounting points. (Exceptions may fenders on certain models category "naked bikes").

When installing, ensure the correct drilling mounting holes and then tighten the screws with a flair for the right fender position.

Installation instructions, hints, tips for installation found here >>>

Technical specifications

  • Fenders with only few exceptions are for the original tire size.
  • Our fenders are made from fiberglass (GFK), from several layers of mat and cloth saturated with high-quality resin => excellent rigidity and flexibility.
  • In-prone places reinforced with Kevlar-Carbon.
  • UV stable white gelcoat can be sanded under water, sprayed filler and sprayed with paint or sanded under water and sprayed in an emergency.

Your questions

Didn't find what you need to know in the part description? Contact us.

In order to better personalize the website for you, we store cookies. By using the website, you agree to this. I need more information