BMW UNI díly
Laverda Universal 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980
Dimensisons: image #2
>>>> why Motoforza?
Basic and cheapest version is GFK fiberglass. Thanks to the precision of employees in handmade production and the emphasis on the quality of these products, they have perfect flexibility, durability and low weight. Composition - UV stable white gelcoat (not paint), fiberglass mat and fiberglass cloth impregnated with resin. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon layers as needed, or Coremat for the seats. Parts are flexible and have a smooth surface. Are made for painting.
Why GFK- fiberglass? For example those who want to put fairings on for the circuit at low cost. Or inexpensively replace a precious piece (broken) original.
These products consist of a transparent gelcoat and carbon fabric and resin used here is different than GRP parts. The components are lightweight and stronger than GRP. Weight reduction compared to GRP is about 30-50%. The parts are polished to a high gloss, for the carbon fiber to stand out. Note: (Engine covers, frame covers, swing arm covers - first layer Carbon (black fabric) + additional layers of Kevlar-Carbon).
Why Carbon design? - For fans of Carbon. Low weight and hardness. In this embodiment, we place extreme emphasis on the surface and visible layer so as to stand out preferably carbon cloth. Suitable for show bikes. Highly polished. Parts also don’t need any paint. On the frame, swing-arm, engine and some small covers by using multiple layers of carbon and kevlar-carbon we achieved extreme hardness of the product.
Para-aramid fiber whose properties are high abrasion resistance. These products consist of a transparent gelcoat, Kevlar fabric, which is carbon-laced (Kevlar-Carbon) against yellow-black color products. There is also used different kind of resin than fiberglass. In this embodiment, we place extreme emphasis on the surface and visible layer so as to stand out preferably carbon cloth. Suitable for show bike. Highly polished. Parts don’t need any paint. This material is used on reinforcements in exposed places in our products.
Why Kevlar-Carbon finish? - For those who want to be different! The components are lightweight, stronger and least susceptible to abrasion of any kind.
Due to the fact that in most uses seat on the builds and modification, it is necessary to assembly fairing on bike and then make seat brackets.
Type of part - Seat Position on the bike - rear
Finish is smooth, nice inside too, pin-hole free.
Brackets and screws are not included.
Didn't find what you need to know in the part description? Contact us.